ITT-500 and ITT-500R current sensors are designed for measuring direct, alternating, pulse currents or their combinations and provide galvanic isolation between primary and secondary circuits.
The ITT-500 sensor is built according to a compensation circuit using a Hall sensor – nominal (maximum continuous) current 500 (1000) A, accuracy up to 0.3%.
The ITT-500R sensor is based on Flux Gate technology – nominal (maximum continuous) current 500 (600) A, accuracy up to 0.05%.
ETT series current sensors (high currents)
The ETT series is designed for measuring direct, alternating, pulse currents or their combinations up to 80 kA.
A special feature of the sensors is their large aperture (window size for the primary current busbar).
ETT 300 series sensors are collapsible, which greatly simplifies the installation of the sensor in electrical equipment.
The ITN-4200 voltage sensor is designed for measuring direct, alternating, pulse voltages or their combinations.
Nominal voltage – 4.2 kV.
Galvanic isolation – 24 kV.
Accuracy – up to 0.2%.
The DOI-143 interrogator is designed for interrogating fiber Bragg grating (FBG) based sensors in the range from 1510 to 1590 nm.
The device is equipped with 16 channels for connecting FBGs (up to 24 FBGs per channel).
Synchronous trigger device (STD)
The synchronous trigger device provides trigger signal replication (optical or electrical) with pre-set programmable delay for each channel (up to 60 channels per device).
1PPS signal replication device (SRD-1PPS)
The device provides reception of 1PPS synchronization signal (IEC 60044-8) in optical or electrical format. The device has up to 60 MM, ST 1PPS outputs.
Supports PTP synchronization.
This organizer is specially designed for laying and fixing optical patch cords in standard 19″ cabinets, both on the front side (connection side) and on the inner side (routing side). The organizer allows neat arrangement of patch cords of different lengths when connecting to equipment and provides space for placement and routing of excess patch cords, while ensuring reliable fixation with Velcro straps.